Ok. Now it's time to drop the engine. 3 bolts is all it takes. I put a paint can under the engine so it wouldn't fall off onto the ground. Here's bolt number one.
Attached to the other side of the 1st bolt is a ground point for the coil/electrical block.
Bolt number 2.
Now's a good time to brace the engine if you haven't already. Bolt number 3 below...
I'm dumb and forgot to disconnect the (clutch/decompression?) lever from the engine... let's do that now before we remove the engine...
Cool. Now the engine is free from the frame. Slide it out form under the frame.
No comments:
Post a Comment